SATO LP 100R Operator's Manual page 216

LP 100R Laser Printer Operator's Guide
3. Press the Up or Down triangle to move the selection bar to the Line
Termination desired.
Note: If Smart Add is selected, the software automatically inserts a CR/LF after
80 characters.
4. Press Enter to save the Line Termination setting selected.
Note:
Pressing Enter after any Printer Setup function has been executed saves the

function. However, it does not store the function.
When the configuration completes, press Back until the Store Configuration

screen displays, and then follow the procedures for executing the Store
function (see
Rev: 1
page 6-63).
Page 6-102
of 128 pages
Chapter 6: Supervisory Functions
April, 2014