Life And Cleaning Interval; Changing Consumables; Toner Removal - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide

Life and Cleaning Interval

Action Name
Replace Toner bottle (contains
1 kg (2.2 lbs.))
Toner collecting bottle
OPC drum
Cleaning blade
Clean Fusing glass
Main charger cat
whisker
Transfer, separation
and charger wire
AIDC sensor

Changing Consumables

The LP 100R informs you of the need to change consumables based on the number
of pages run on the particular consumable. There are two levels of warnings:
When 90% of the life of a consumable has been reached, the printer displays

the message Near End of Life. This informs you that the item needs to be
replaced in a short time.
When the full life of the item has been reached, the printer displays the

message End of Life, which indicates that the item should be replaced as soon
as possible. Continuing to use the printer with this consumable may
compromise print quality.

Toner Removal

Use the following procedures to remove toner.
Location of toner
Toner on the printer
Toner on your hands
Toner on your clothes
Note: When washing hands or clothing to remove toner, be sure to use cool
water. Do not use hot water.
Rev: 1
Life/Cycle
Approximately
20,000 sheets
Approximately
200,000 sheets
440,000 sheets
220,000 sheets
30,000 sheets
50,000 sheets
50,000 sheets
50,000 sheets
Procedure
Wipe it away with a cleaning cloth.
1. Lightly pat your hands with a cleaning pad or dry
cloth.
2. Wash your hands with soap.
1. Absorb the toner with a vacuum cleaner.
2. Wash your clothes with neutral detergent.
Page 4-3
of 24 pages
Chapter 4: Printer Maintenance
Tool to Use
See page 4-15.
See page 4-17.
See page 4-18.
See page 4-21.
Clean once each shift
with a cloth moistened
with water or dry cloth.
Clean once each shift
with packaged cleaner.
Clean once each shift
with packaged cleaner.
Clean once each shift
with a dry cloth.
April, 2014