LP 100R Laser Printer Operator's Guide
Time Function
The Time menu allows you to select the time configuration that is most compatible
with your system requirements.
Note: Time settings can not be changed when a print job is in progress.
Time Function Access
1. When the Supervisor Menu displays, press either the Up or Down triangle to
move the selection bar to the Time function.
2. Press Enter, which causes the following Time menu to display:
3. The following functions can be selected from the Time menu:
System Time – System Time as HH:MM:SS, with the HH position
expressed in military time (i.e., 1:00
13:00–24:00).
Rev: 1
Figure 6-31. Time menu.
.
. through midnight is displayed as
P
M
Page 6-42
of 128 pages
Chapter 6: Supervisory Functions
April, 2014