Power Up And Down Procedures - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide

Power Up and Down Procedures

The printer is powered up through the use of the POWER LED switch located to
the right of the TDU.
Figure 3-2. POWER LED switch (circled) for powering up.
The printer is powered down through the use of the Off button on the TDU.
For specific instructions, see the following sections.
Rev: 1
Figure 3-3. Off button for powering down.
Page 3-4
of 32 pages
Chapter 3: Printer Operation
April, 2014