Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
KodescriptPlus Errors (cont'd)
Code
Description
67
Link field data length.
68
Field number being linked
does not exist.
69
Maximum number of AIs
(Application Identifications)
has been exceeded.
70
Maximum length allowed for
a variable-length AI has
been exceeded.
71
Maximum Length allowed
for a fixed-length AI has
been exceeded.
72
An invalid or unrecognized
AI has been detected.
Rev: 1
Explanation
The amount of data supplied for a specific link field
exceeds the amount of data specified.
The program cannot find a field number that was to
be linked.
The data stream for a UCC/EAN 128 bar code
contains more than 4 allowable AIs.
A variable-length AI that contains more than the
maximum number of characters allowed has been
included in a UCC/EAN 128 bar code.
A variable-length AI that contains less than or more
than the maximum number of characters allowed
has been included in a UCC/EAN 128 bar code.
The data stream for a UCC/EAN 128 bar code
contains an AI that cannot be found in the
specification list for this bar code.
Page 5-29
of 30 pages
Chapter 5: Problem Solving
April, 2014
Advertisement
Table of Contents
