LP 100R Laser Printer Operator's Guide
7. Raise the tractor unit by lifting the tractor unit handle.
8. Press the LOAD switch (F), which advances the stock into the printer, lining it
up in the top-of-form position.
Note: If the swing guide is enabled, pressing the LOAD switch causes the
following screen to display:
F
9. Depending on the direction of the first fold, press In or Out.
10. To change the configuration number displayed, press Recall and see
Configurations
Rev: 1
Figure 3-20. First Fold Direction.
starting on page 3-19.
Page 3-32
of 32 pages
Chapter 3: Printer Operation
Recall
April, 2014