LP 100R Laser Printer Operator's Guide
Controller Errors
Message
Out of Memory
FIFO Underrun
GPF
Communication Errors
Message
Overrun
Error
Unknown
Error
Rev: 1
Explanation
The printer has requested more memory than the operating
system can provide at the present time.
Fatal error. Call service.
General Protection Fault. Fatal error. Write down the
number at the bottom of the display screen (example: EIP=
000E4932) and notify service.
Explanation
The receive buffer of the printer is
full and the printer could not stop
the host from sending more print
data.
Indicates that an unidentifiable
communication error has occurred.
Page 5-22
of 30 pages
Chapter 5: Problem Solving
Action
Reset the host and printer.
Reset the host and printer.
April, 2014