Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Paper Suction
The Paper Suction setting adjusts the tension on the documents to be printed to
maximize print quality and minimize paper jams.
If the Auto setting (the preferred setting) is selected, the energy applied is
determined by the Material Type. If a numeric setting is selected, the lowest
number will apply the least energy, and the highest number will apply the most
energy.
Note: The Paper Suction setting can not be changed when a print job is in
progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Paper Suction function.
2. Press Enter, which causes the following Paper Suction screen to display:
3. The following Paper Suction number settings (in addition to the Auto setting)
can be selected from this screen.
1
2
3
4
5
6
7
8
Rev: 1
Figure 6-86. Paper Suction screen.
Page 6-123
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
