Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Characters Per Inch
The Characters Per Inch setting specifies the character width and horizontal
spacing to be used by the printer. Increasing the number of characters to be
printed per inch causes a corresponding decrease in character width.
Note: The Characters Per Inch setting can not be changed when a print job is in
progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Characters Per Inch function.
2. Press Enter, which causes the following Characters Per Inch screen to display:
Current
number of
characters
per inch
Note:
•
Pressing CL after entering numeric data deletes 1 digit each time it is pressed.
•
The number of characters per inch can be expressed only in Text Characters.
Rev: 1
Figure 6-59. Characters Per Inch screen.
Page 6-77
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
