LP 100R Laser Printer Operator's Guide
5. If Daylight Saving Time is not to be used:
a. Press the Up or Down triangle to move the selection bar to Disabled.
b. Press Enter, which inhibits Daylight Saving Time and returns the system
to the Supervisor Menu.
6. If Daylight Saving Time is to be used:
a. Press the Up or Down triangle to move the selection bar to Enabled.
b. Press Enter, which selects Daylight Saving and returns the system
to the Supervisor Menu.
Rev: 1
Chapter 6: Supervisory Functions
Page 6-51
of 128 pages
April, 2014