LP 100R Laser Printer Operator's Guide
Note:
•
Brackets ( [ ] ) around a specific Emulation indicate that it is the Default
Configuration Emulation.
•
An arrow () pointing to a specific page Emulation indicates that it is the type
assigned to the currently displayed configuration.
4. Press the Up or Down triangle to move the selection bar to the Emulation
desired.
5. Press Enter to save the Emulation selected.
Note:
Pressing Enter after any Printer Setup function has been executed saves the
function. However, it does not store the function.
When the configuration completes, press Back until the Store Configuration
screen displays, and then follow the procedures for executing the Store
function (see
Rev: 1
page
6-63).
Page 6-94
of 128 pages
Chapter 6: Supervisory Functions
April, 2014