Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Daylight Saving
This allows the automatic start and discontinuance of Daylight Savings Time when
the System Time is in effect.
Note: The Daylight Saving function does not work in conjunction with GMT Time.
1. Press the Up or Down triangle on the Supervisor Menu to move the selection
bar to the Daylight Saving function.
2. Press Enter, which causes the following Time menu to display:
3. Press the Up or Down triangle to move the selection bar to the Daylight
Saving function.
4. Press Enter, which causes the following screen to display:
Rev: 1
Figure 6-39. Time menu.
Figure 6-40. Daylight Saving screen.
Page 6-50
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
