System Start-Up Screen Definitions; System Start-Up Screen Definitions - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide

System Start-up Screen Definitions

Item
A. Mode of operation
B. Configuration
Rev: 1
Figure 3-7. System start-up screen.
Definition
The LP 100R printer is operated under 4 different
modes:
Online Idle – When the printer is in the

Online Idle mode, it is ready to accept print
data from a host computer.
Note: When power to the printer is turned
on, the printer activates in the Online Idle
mode.
Online Print – The printer is either

processing or printing the data it has
received.
Offline Idle – The printer must be in the

Offline Idle mode to load paper, execute
some maintenance functions, or to recall a
stored printer configuration.
Offline Print – To temporarily suspend the

Online Print mode and switch the printer to
the Offline Print mode, press the OFFLINE
switch. Press the ONLINE switch to return
the printer to the Online Print mode.
The system start-up screen displays the last
active User Configuration No., which can range
from 001-999.
If the User Configuration No. has not been
stored, or if it is stored but not used, the default
Configuration No., 000, displays.
Page 3-11
of 32 pages
Chapter 3: Printer Operation
(continued on next page)
April, 2014