Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Page Coverage
The Page Coverage display is a calculation of the coverage of black pixels on the
current bit-mapped page in the printer's memory. To get an accurate reading for
page coverage, make sure you send an entire page of print data. The maximum
page coverage supported by the LP 100R printer is 20%.
Note: The Display Page Coverage function should be executed only when the
printer is in the Online Print mode, and a print job is in progress.
Executing this function when the printer is in the Offline Idle mode will cause a
Coverage = 0% message to be displayed.
1. Press the OFFLINE switch to change the printer from the Online Print mode to
the Offline Print mode.
2. The following screen displays:
3. Press Menu, which causes the Main Menu to display.
4. Press the Up or Down triangle to move the selection bar to the Advanced
function.
Rev: 1
Figure 6-12. Offline Print screen.
Page 6-18
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
