LP 100R Laser Printer Operator's Guide
Printer Components: Right-Side Rear View
Tractor width knob
Load switch
Tractor raise lever
Form end sensor
Tractor unit
Web guide
Suction brake unit
Right edge forms guide
Figure 2-6. Right-side rear view of LP 100R laser printer.
Tractor Width Knob
When rotated, adjusts the width of the tractor assembly to conform to the width of
the documents to be printed.
Load Switch
When pressed, automatically sets the top of form (TOF), advancing the form to the
correct start of print position (as specified in the Configuration File).
Tractor Raise Lever
Lifting up this lever causes the tractor unit to rise to its correct print position.
Form End Sensor
Detects the presence or absence of forms.
When the end of form is detected, the Printing function suspends, the last
page ejects from the printer, and a prompt to load forms displays on the TDU.
Tractor Unit
Guides and feeds forms through the printer starting with the leading edge of
the forms.
When pushed down, lowers the tractor unit to the load position.
If left down, causes an Interlock error message to be displayed.
Rev: 1
Chapter 2: Printer Components
Main circuit breaker
Page 2-11
of 12 pages
April, 2014