Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
5. Each segment of System Time (HH:MM:SS) is set by:
a. Pressing the Down triangle to change the time segments to an earlier time
or pressing the Up triangle to change the time segments to a later time.
b. Press Enter after each change to advance to the next segment.
6. Pressing Enter, after the SS time segment has been entered, sets the new
System Time and returns the system to the Supervisor Menu.
Rev: 1
Chapter 6: Supervisory Functions
Page 6-47
of 128 pages
April, 2014
Advertisement
Table of Contents
