LP 100R Laser Printer Operator's Guide
Store Configuration
The Store setting is used to either store a new configuration on the printer's hard
drive or store updates to an existing configuration already stored on the printer's
hard drive.
Note: The Store setting can not be executed when a print job is in progress.
1. Press the Up or Down triangle on the Configuration menu to move the
selection bar to the Store function.
2. Press Enter, which causes the following Store Configuration screen to display:
Current
Config
Rev: 1
Figure 6-50. Store Configuration screen.
Page 6-63
of 128 pages
Chapter 6: Supervisory Functions
April, 2014