Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Placement Test
The Placement Test pattern page prints an array of filled boxes on the current
form size. You can use this test page to verify the correct positioning of the image
on the form.
Note: The Placement Test pattern can not be printed when a print job is in
progress.
1. Press the Up or Down triangle on the Test Prints menu to move the selection
bar to the Placement Test function.
2. Press Enter, which causes the following screen to display while the Placement
Test pattern is printing:
3. To terminate printing, press Clear, which causes a Cancelling Test Print
Message to display.
4. When printing is terminated, the system returns to the Supervisor Menu.
5. Press Feed until the printed form completely ejects from the printer.
Rev: 1
Figure 6-10. Placement Test pattern.
Page 6-16
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
