Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
KodescriptPlus
1. Press the Up or Down triangle on the Emulation Settings menu to move the
selection bar to the KodescriptPlus function.
2. Press Enter, which causes the following menu to display:
Field Check – Indicates how KodescriptPlus Field Check information should be
displayed:
OFF
-
Do not display Field Check information
ON the TDU
-
Default: [ON Panel]
Display Field Check information on the TDU
ON RS-232
-
Send Field Check information to the RS-232 Port
ON Monitor
-
Display Field Check information on a monitor connected to the METO-Logic
Controller
Rev: 1
Figure 6-78. KodescriptPlus menu.
Page 6-106
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
