Kodescriptplus Errors - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide

KodescriptPlus Errors

Code Description
51 Excessive number of fields
52 Excessive number of Hard
Data fields
53 Excessive number of Line
fields
54 Excessive number of
Reverse Image fields
55 Excessive number of link
fields within a field
56 Undetermined link field
Hard Data length
57 Cannot open file for reading
58 Cannot open file for writing
59 Unable to write to file
60 Distorted PCX file
61 Number of defined fields
greater than supplied data
62 Defined fields less than
supplied data
63 Command/data not
correctly terminated
64 Invalid Field Number
character
65 Invalid Repeat Count
66 Data Condensing error
Rev: 1
Explanation
The number of defined fields exceeds the maximum
number permitted (499).
The number of defined Hard Data fields exceeds the
maximum number permitted (99).
The number of Line fields exceeds the maximum
number permitted (99).
The number of Reverse Image fields exceeds the
maximum number permitted (49).
The number of fields being linked within a field
exceeds the maximum number permitted (5).
The terminating Hard Data Delimiter was not
detected, which means that the length cannot be
determined.
Occurs when a PCX file is specified in a
KodescriptPlus file but is not found in the controller.
An error has occurred while writing a PCX file to the
controller. This file will be corrupted.
The file created by the program is corrupted.
The PCX file is corrupt. One possible cause is the
use of a color PCX file.
The number of fields coded as part of the
KodescriptPlus program is greater than the number
of data fields to be printed.
The amount of data supplied exceeds the number
of fields coded as part of the KodescriptPlus
program.
The buffer does not contain an appropriate
terminating character.
The Field Number includes an invalid character.
The Repeat Count includes an invalid character.
The number of characters to be printed in a field
that is associated with the Data Condensing On
command (^f01^-) exceeds the number of
characters specified for that field.
Page 5-28
of 30 pages
Chapter 5: Problem Solving
Continued on next page
April, 2014