Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Supervisor Menu
Supervisor Menu Access
1. If the POWER LED is not green, press it for approximately 1 second and
release.
2. Press Menu to display the Main Menu.
3. Select Advanced from the Main Menu.
4. Select Supervisor from the Advanced Menu.
5. If password protection is enabled, the following screen displays, and it will be
necessary to enter a valid password on the numeric keypad to gain access to
the Supervisor Menu:
If you do not have access to the required password, see your supervisor.
Rev: 1
Figure 6-1. Password-protection enabled.
Page 6-5
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
