Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
System Program – Full Installation
Note: Before installing a full system, it is important that you print a Status page
and the Configuration pages of the current file, which can be used as a backup
reference to the current file.
See
Chapter 3: Printer Operation
and Configuration pages.
1. Verify that the POWER LED switch is illuminated in green.
2. Open the front door on the printer.
NOTE: Opening the front door causes the audible alarm to sound, and a Front
Cover Interlock graphic error message displays.
3. Press the BEEP button to turn off the alarm.
4. Insert the USB Flash Drive into the USB port.
5. Close the front door on the printer.
6. Reboot the system.
Rev: 1
Appendix A: Installing System Software
for the procedures relevant to printing Status
Page A-3
of 10 pages
April, 2014
Advertisement
Table of Contents
