Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Cleaning Blade Replacement
1. Open the front door.
2. Pull out the EP holder slowly as far as it will come.
3. Remove the main charger unit by lifting up the developing unit side
approximately 30 degrees (position A).
4. Remove the OPC cartridge by holding the handle and the plastic part
(position B).
Note:
To avoid damage, do not touch the OPC drum. Place the OPC cartridge on
a level place.
Use the supplied cleaning pad or other suitable item to shield the OPC
drum. Exposing it to light for more than a brief period of time results in
degradation.
Rev: 1
A
Page 4-21
of 24 pages
Chapter 4: Printer Maintenance
OPC cartridge
OPC drum
B
April, 2014
Advertisement
Table of Contents
