Reset Function; Reset Function Access - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide

Reset Function

This option resets the printer and the METO-Logic Controller.
Note: The Reset menu has been included in this section only as a point of
reference. Its use is limited to service personnel when troubleshooting a potential
printer problem.

Reset Function Access

1. When the Supervisor Menu displays, press either the Up or Down triangle to
move the selection bar to the Reset function.
2. Press Enter, which causes the following menu to display:
3. The functions that can be selected from the Reset menu include:
Reset METO-Logic

Reset Engine

Reset All

Reset Defaults

Rev: 1
Figure 6-22. Reset menu.
Page 6-33
of 128 pages
Chapter 6: Supervisory Functions
April, 2014