LP 100R Laser Printer Operator's Guide
Emulation Settings
The Emulation settings contain the parameters specific to each emulation and tell
the printer how to interpret the content of these parameters as they appear in the
print data stream.
Note: The Emulation settings can not be changed when a print job is in progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Emulation Setting function.
2. Press Enter, which causes the following Emulation Setting menu to display:
3. The Emulations that can be selected from this menu include:
KodescriptPlus
IGP/PGL (not currently available)
IGP/VGL (not currently available)
PCL5e
IPDS
Note: IPDS is an optional feature, so it is not available for general use. If the IPDS
Emulation is required, a manual relative to its functionality will be furnished.
Rev: 1
Figure 6-77. Emulation Setting menu.
Page 6-105
of 128 pages
Chapter 6: Supervisory Functions
April, 2014