LP 100R Laser Printer Operator's Guide
5. Remove the OPC drum.
Note:
To avoid damages, do not touch the OPC drum.
Use the supplied cleaning pad or other suitable item to shield the OPC
drum. Exposing it to light for more than a brief period of time results in
degradation.
6. Remove the cleaning blade by loosening one screw.
Note: Be careful of the edge of the paper separator fingers.
7. Install the cleaning blade by tightening one screw.
Also, do not hit or rub the edge of the blade with a hard object.
Rev: 1
!
CAUTION
NEVER touch the edge of the blade with your hands.
Page 4-22
of 24 pages
Chapter 4: Printer Maintenance
OPC
drum
Cleaning pad
Screw
Cleaning blade
Screw
Cleaning blade
April, 2014