Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
AIDC Mode
The AIDC Mode permits adjustment of the image.
Note: The AIDC Mode setting can not be changed when a print job is in progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the AIDC Mode function.
2. Press Enter, which causes the following AIDC Mode screen to display:
Note:
•
Brackets ( [ ] ) around a specific AIDC Mode setting indicate that it is the
Default AIDC Mode setting.
•
An arrow () pointing to a specific AIDC Mode setting indicates that it is
the setting assigned to the current configuration.
Rev: 1
Figure 6-88. AIDC Mode screen.
Page 6-127
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
