Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
System Program – Software Upgrade
The System Program upgrade will update all files except User's Configuration and
System Setup files.
The current customer settings in the User's Configuration and System Setup files
will not be altered. Any new Configuration and/or Setup file features will be added
at the end of their respective files.
Note: Before installing a System Program upgrade, it is important that you print a
Status page and the Configuration pages of the current file, which can be used as
a backup reference to the current file.
See
Chapter 3: Printer Operation
and Configuration pages.
1. Verify that the POWER LED switch on the printer is in the on position and that
the printer is in the Offline Idle mode.
2. Open the front door on the printer.
Note: Opening the front door causes the audible alarm to sound and a Front
Cover Interlock graphic error message to display.
3. Press the BEEP button to turn off the alarm.
4. Insert the USB Flash Drive into the USB port.
5. Close the front door on the printer.
6. Reboot the system.
Rev: 1
Appendix A: Installing System Software
for the procedures relevant to printing the Status
Page A-6
of 10 pages
April, 2014
Advertisement
Table of Contents
