LP 100R Laser Printer Operator's Guide
Test Prints Function
This function allows you to evaluate print quality and test printer configurations
before they are saved.
Test Prints Function Access
1. When the Supervisor Menu displays, press either the Up or Down triangle to
move the selection bar to the Test Prints function.
2. Press Enter, which causes the following Test Prints menu to display:
3. The functions that can be selected from the Test Prints menu include:
1
/
" Grid
10
Character Fill
Font Sampler
Placement Test
Page Coverage
User Files
Font Detail
Note: Test Prints can not be printed on paper that is less than 8½" wide.
Because some Test Print patterns extend across standard 14½" paper when
printed, we recommend 14½" paper be used when printing any test pattern to
avoid missing part of the print data for that pattern.
Rev: 1
Figure 6-3. Test Prints menu.
Page 6-9
of 128 pages
Chapter 6: Supervisory Functions
April, 2014