Dhhs (Department Of Health And Human Services); Cdrh (Center Of Devices And Radiological Health) Regulations - SATO LP 100R Operator's Manual

LP 100R Laser Printer Operator's Guide
DHHS
This printer is certified as a Class 1 Laser Product under the United States
Department of Health and Human Services (DHHS) Radiation Standard according
to the Radiation Control for Health and Safety Act of 1968. This means that the
printer does not produce hazardous laser radiation.
Since radiation emitted inside the printer is wholly confined within protected
housings and external covers, the laser beam cannot escape from the equipment
during any phase of user operation.
CDRH Regulations
The Center of Devices and Radiological Health (CDRH) of the United States Food
and Drug Administration implemented regulations for laser products on
August 2, 1976. These regulations apply to laser products manufactured from
August 1, 1976. Compliance is mandatory for laser products marketed in the
United States.
The following statement, which indicates compliance with the CDRH regulations
must be affixed to the laser products marketed in the United States:
THIS PRODUCT CONFORMS WITH CDRH
RADIATION PERFORMANCE STANDARD
TITLE 21 CFR CHAPTER 1, SUBCHAPTER J
Use of controls or adjustments or performance of procedures
other than those specified in this manual may result in
Rev: 1
TITLE 21 CFR CHAPTER 1, SUBCHAPTER J
!
DANGER
hazardous radiation exposure.
Page 1-6
of 6 pages
Chapter 1: General Information
April, 2014