Table of Contents
Advertisement
LP 100R Laser Printer Operator's Guide
Primary Font
The Primary Font setting specifies the Primary Font that will be used by the printer
for print data that does not specify a font.
Note: The Primary Font setting can not be changed when a print job is in
progress.
1. Press the Up or Down triangle on the Printer Setup menu to move the
selection bar to the Primary Font function.
2. Press Enter, which causes the following Primary Font screen to display:
Note:
•
Brackets ( [ ] ) around a specific Primary Font indicate that it is the Default
Configuration Primary Font.
•
An arrow () pointing to a specific Primary Font indicates that it is the Primary
Font assigned to the currently displayed configuration.
Rev: 1
Figure 6-72. Primary Font screen.
Page 6-95
of 128 pages
Chapter 6: Supervisory Functions
April, 2014
Advertisement
Table of Contents
