Lcd Function Setting Procedure - SATO Argox I4 Series User Manual

3 Printer operation

3.1.1 LCD Function Setting Procedure

The following procedure is an example of setting procedure to direct thermal
printing mode:
READY (203, AUTO)
PRINT MODE
THERM. TRANSFER*
PRINT MODE
DIRECT THERMAL
PRINT MODE
DIRECT THERMAL*
READY (203, AUTO)
Press both PAUSE + CANCEL buttons.
Then release the buttons to enter settings.
Function which has "*"
sign is current setting.
Keep press FEED button until LCD
prompts the function setting needed.
Press CANCEL button
to store the setting.
Press PAUSE button to
continue the other settings.
Now printer is in
normal printing
33
Note
Press both PAUSE + CANCEL
buttons anytime in the panel setting and
then release them to exit from settings.
Front Panel