Front Panel And External Connectors - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

13 Front panel and external
connectors
This chapter provides information on how to replace the front panel module and
optional front LAN connector board and front VGA connector.
Safety notes
V
CAUTION!
When inserting the front panel module into the server, ensure not to
●
pinch or strain any connected cables.
Circuit boards and soldered parts of internal options are exposed and
●
can be damaged by static electricity. Always discharge static build-up
(e.g. by touching a grounded object) before handling electrostatic-
sensitive devices (ESDs)
Do not touch the circuitry on boards or soldered parts. Hold circuit
●
boards by their metallic areas or edges.
For further information, please refer to chapter
●
information" on page
In this chapter
"Replacing the front panel module" on page 712
●
"Installing the front LAN connector" on page 730
●
"Removing the front LAN connector" on page 742
●
"Replacing the front LAN connector and board" on page 745
●
"Installing the front VGA connector" on page 748
●
"Removing the front VGA connector" on page 758
●
"Replacing the front VGA connector" on page 761
●
TX300 S7 / RX350 S7
49.
Upgrade and Maintenance Manual
"Important
711