Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
CRANKCASE/TRANSMISSION
Install the dowel pin in the upper crankcase hole.
Install the countershaft bearing set ring into the
upper crankcase groove.
Install the countershaft by aligning the countershaft
bearing groove with the set ring on the crankcase,
and bearing cap hole with the dowel pin.
Also align the countershaft bearing stopper pin with
the groove in the crankcase.
CRANKCASE ASSEMBLY
Apply a light, but thorough, coating of liquid sealant
to the crankcase mating surface.
Do not apply sealant to the crankcase 8 mm bolt
(main journal bolt) area and the oil passage area as
shown.
11-16
email: info@motomatrix.co.uk
DOWEL PIN
BEARING SET RING
BEARING
COUNTERSHAFT
SET RING
STOPPER PIN
DOWEL PIN