Honda CBF600SA Service Manual page 430

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
REAR WHEEL/SUSPENSION
DISASSEMBLY/INSPECTION
Remove the screws and drive chain slider.
Check the drive chain slider for wear or damage.
Replace if necessary.
Remove the pivot collar and dust seals from the
swingarm left pivot.
Check the dust seals and collar for damage or
fatigue.
Check the needle bearings for damage.
Remove the pivot side collars and dust seals from
the swingarm right pivot.
Check the dust seals and collars for damage or
fatigue.
Turn the inner race of right pivot bearings with your
finger.
The bearings should turn smoothly and quietly.
Also check that the bearing outer race fits tightly in
the hub.
Remove and discard the bearings if the races do not
turn smoothly and quietly, or if they fit loosely in the
pivot.
14-20
email: info@motomatrix.co.uk
DRIVE CHAIN SLIDER
NEEDLE BEARING
PIVOT COLLAR
DUST SEALS
BEARING
SCREWS
DUST SEALS
SIDE COLLARS