O 2 Sensor; Intake Air Duct - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
O SENSOR
2
REMOVAL/INSTALLATION
• Handle the O
• Do not get grease, oil or other materials in the O
sensor air hole, or it may be damaged.
• Do not service the O
Remove the exhaust pipe (page 2-11).
Remove the O
TOOL:
O sensor wrench
2
• Be careful not to damage the sensor wire.
• Do not use an impact wrench while removing or
installing the O
Install the O
tighten it securely.
Install the exhaust pipe (page 2-12).

INTAKE AIR DUCT

INTAKE AIR DUCT VALVE
DIAPHRAGM
Inspection
Remove the left intake air duct from the air cleaner
housing (page 5-64).
Disconnect the vacuum hose from the diaphragm.
Connect a vacuum pump to the diaphragm and
apply specified vacuum.
SPECIFIED VACUUM: 250 mm Hg (9.8 in Hg)
The vacuum should hold and the duct valve should
remain open.
email: info@motomatrix.co.uk
sensor with care.
2
sensor while it is hot.
2
sensor using the special tool.
2
07LAA-PT50101
sensor, or it may be damaged.
2
sensor onto the exhaust pipe and
2
FUEL SYSTEM (PGM-FI)
2
O SENSOR
2
O SENSOR WRENCH
2
VACUUM PUMP
DUCT VALVE
INTAKE AIR DUCT
5-101