Honda CBF600SA Service Manual page 389

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Install the left brake caliper and tighten the new
mounting bolts to the specified torque.
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)
Install the brake pad (page 15-15).
With the front brake applied, pump the fork up and
down several times to seat the axle and check brake
operation by applying the brake lever.
Make sure that the front axle groove is flush with
the outer surface of the left fork leg.
Tighten the left axle holder bolt to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Check the front wheel speed sensor air gap (page
CBF600SA/NA only:
16-24).
FORK
REMOVAL
Remove the following:
– front wheel (page 13-15)
– front brake caliper
– CBF600SA/NA (page 15-30)
– CBF600S/N (page 15-34)
– front fender (page 2-6)
Loosen the fork top bridge pinch bolt.
If it is necessary to disassemble the fork, loosen the
fork cap at this moment.
email: info@motomatrix.co.uk
FRONT WHEEL/SUSPENSION/STEERING
BOLTS
HOLDER BOLT
FORK CAP
BRAKE CALIPER
TOP BRIDGE PINCH BOLT
13-21