Honda CBF600SA Service Manual page 314

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
CLUTCH/STARTER CLUTCH/GEARSHIFT LINKAGE
INSTALLATION
Apply a locking agent to the stopper arm pivot bolt
threads.
Install the following:
– washer
– return spring
– stopper arm
– pivot bolt
Tighten the stopper arm pivot bolt to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Install the dowel pin onto the shift drum.
Install the gearshift cam while holding the stopper
Align the dowel pin
arm using a screwdriver as shown.
on the shift drum
with the wide
groove on the
gearshift cam.
Apply a locking agent to the shift drum center
socket bolt threads.
Tighten the socket bolt to the specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
Install the thrust washer and gearshift spindle
assembly into the crankcase while aligning the
spring ends with the crankcase stopper pin.
9-24
email: info@motomatrix.co.uk
WASHER
RETURN SPRING
PIVOT BOLT
STOPPER ARM
GEARSHIFT CAM
DOWEL PIN
WIDE GROOVE
SOCKET BOLT
Align THRUST WASHER
GEARSHIFT SPINDLE