Honda CBF600SA Service Manual page 255

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Connect the water hose to the thermostat housing
cover and tighten the hose band screw securely.
Route the starter motor cable and ground cable.
Refer to the wires
Tighten the starter motor mounting bolts with the
properly
ground cable.
(page 1-24).
Connect the starter motor cable, then tighten the
terminal nut to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the rubber cap securely.
Secure the alternator wire with the clamps.
Connect the alternator 3P (Black) connector.
email: info@motomatrix.co.uk
ENGINE REMOVAL/INSTALLATION
SCREW
NUT STARTER MOTOR CABLE
BOLT
CLAMPS
3P (Black) CONNECTOR
WATER HOSE
RUBBER CAP
GROUND CABLE
ALTERNATOR WIRE
7-15