Honda CBF600SA Service Manual page 404

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
FRONT WHEEL/SUSPENSION/STEERING
Install the ball race remover into the head pipe as
Note the installation
shown.
direction of the
assembly base; the
Align bearing remover A with the groove in the
small I.D. side
steering head.
facing the upper
Lightly tighten nut B with a wrench.
attachment.
While holding the driver shaft with a wrench, turn
nut A gradually to remove the upper bearing outer
race.
Install the ball race remover into the steering head
Note the installation
pipe as shown and remove the lower outer race
direction of the
using the same procedure as for the upper race.
assembly base; the
large I.D. side
facing the lower
attachment. Be
careful not to bend
or damage the
brake pipes
(CBF600SA/NA)
13-36
email: info@motomatrix.co.uk
DRIVER
UPPER OUTER
ATTACHMENT
RACE
(upper)
BEARING
REMOVER A
DRIVER SHAFT
DRIVER
ATTACHMENT
(upper)
BEARING
REMOVER B
LOWER
OUTER RACE
DRIVER
ATTACHMENT
(lower)
NUT A
ASSEMBLY
BASE
NUT B
DRIVER
ATTACHMENT
(lower)
DRIVER SHAFT
NUT B
ASSEMBLY
BASE
NUT A