Honda CBF600SA Service Manual page 217

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Inspection
Remove the IDC solenoid valve.
Check that the air should flow (A) to (B), only when
the 12 V battery is connected to the IDC solenoid
valve terminals.
CONNECTION:
Battery (+) terminal – Black/white terminal
Battery (–) terminal – Yellow/black terminal
Check the resistance between the terminals of the
IDC solenoid valve.
STANDARD: 28 – 32 Ω (20 °C/68 °F)
If the resistance is out of specification, replace the
IDC solenoid valve.
ONE-WAY VALVE
Removal/Installation
Remove the air cleaner housing (page 5-61).
Remove the one-way valve by disconnecting the
vacuum hoses.
Installation is in the reverse order of removal.
Route the vacuum
hoses correctly.
Inspection
Check the one-way valve operation as follows:
– Air should flow (A) to (B)
– Air should flow (A) to (C)
– Air should not flow (B) to (A)
– Air should not flow (B) to (C)
If the operation is incorrect, replace the one-way
valve.
email: info@motomatrix.co.uk
FUEL SYSTEM (PGM-FI)
(B)
IDC SOLENOID VALVE
ONE-WAY VALVE
HOSES
ONE-WAY VALVE
(A)
(C)
(A)
(B)
5-103