Honda CBF600SA Service Manual page 569

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
POWER/GROUND LINE INSPECTION
CBF600S/SA:
Disconnect the combination meter 16P (Black) con-
nectors.
Check the following at the wire harness side con-
nector terminals of the combination meter.
Power input line
Measure the voltage between the Black/brown wire
terminal (+) and body ground (–).
There should be battery voltage with the ignition
switch ON.
If there is no voltage, check for open circuit in Black/
brown wire.
Back-up voltage line
Measure the voltage between the Red/green wire
terminal (+) and body ground (–).
There should be battery voltage at all times.
If there is no voltage, check for open circuit in Red/
green wire.
Ground line
Measure the continuity between the Green/black
wire terminal and body ground.
There should be continuity.
If there is no continuity, check for open circuit in
Green/black wire.
email: info@motomatrix.co.uk
LIGHTS/METERS/SWITCHES
16P (Black) CONNECTOR
Viewed from harness side/
the 16P connector:
Black/brown (+)
Viewed from harness side/
the 16P connector:
Red/green (+)
Viewed from harness side/
the 16P connector:
Green/black
20-21