Honda CBF600SA Service Manual page 422

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
REAR WHEEL/SUSPENSION
Drive the driven flange bearing into the driven
flange using the special tools.
TOOLS:
Driver
Attachment, 52 X 55 mm
Pilot, 20 mm
Driven flange assembly
Install the driven sprocket and tighten the nuts tem-
porarily.
Install the wheel damper rubbers into the wheel
Replace the
hub.
damper rubbers as
a set.
Apply grease to the new O-ring and install it into the
groove of the wheel hub.
Apply grease to the driven flange and rear wheel
hub contact area.
Install the driven flange assembly into the left wheel
hub.
14-12
email: info@motomatrix.co.uk
ATTACHMENT/PILOT
07749-0010000
07746-0010400
07746-0040500
DRIVEN SPROCKET NUTS
BEARING/COLLAR
DAMPER RUBBERS
DRIVEN FLANGE
REAR WHEEL
DRIVER
O-RING