Immobilizer Receiver - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
CKP SENSOR LINE INSPECTION
Disconnect the CKP sensor 2P (Red) connector.
Check the Yellow wire for continuity between the
ECM and CKP sensor connectors.
Also check the White/yellow wire for continuity
between the ECM and CKP sensor connectors
There should be continuity between the same color
wire terminals.

IMMOBILIZER RECEIVER

Remove the front center cowl (page 2-10).
CBF600S/SA:
Disconnect the immobilizer receiver 4P (Natural)
connector.
Remove the headlight unit (page 20-6).
CBF600N/NA:
Disconnect the immobilizer receiver 4P (Natural)
connector.
POWER INPUT LINE INSPECTION
Measure the voltage between the Yellow/red wire
terminal (+) and ground (–).
There should be approx. 5 V when the ignition
switch is turned to "ON".
email: info@motomatrix.co.uk
IMMOBILIZER SYSTEM (HISS)
White/yellow Yellow
A32
B22
33P (Black) 33P (Light gray)
CONNECTOR A (Wire CONNECTOR B (Wire
side/female terminals) side/female terminals)
4P (Natural) CONNECTOR
4P (Natural) CONNECTOR
4P (Natural) CONNECTOR
(Wire side/female terminals)
Yellow/red
2P (Red)
CONNECTOR
(Wire side/male
terminals)
21-15