Honda CBF600SA Service Manual page 360

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
CRANKSHAFT/PISTON/CYLINDER
Tighten the nuts in two or three steps alternately,
then tighten the nuts to the specified torque.
TORQUE: 26 N·m (2.7 kgf·m, 19 lbf·ft)
Remove the bearing caps and measure the com-
pressed plastigauge at its widest point on the
crankpin to determine the oil clearance.
SERVICE LIMIT: 0.06 mm (0.002 in)
If the oil clearance exceeds the service limit, select
the correct replacement bearings.
BEARING SELECTION
Record the connecting rod I.D. code number (1 or 2)
Numbers (1 or 2) on
or measure the I.D. with the connecting rod bearing
the connecting rods
cap installed without bearing inserts.
are the codes for
the connecting rod
I.D.
If you are replacing the crankshaft, record the corre-
Letters (A or B) on
sponding crankpin O.D. code letter (A or B).
the crankweight are
the codes for the
If you are reusing the crankshaft, measure the
crankpin O.D.s
crankpin O.D. with the micrometer.
from left to right.
12-12
email: info@motomatrix.co.uk
BEARING CAP NUTS
CONNECTING ROD I.D. CODE
CRANKPIN O.D. CODE