Honda CBF600SA Service Manual page 521

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
If the regulated voltage reading (page 17-8) is out of
the specification, measure the voltage between con-
nector terminals (wire harness side) as follows:
Item
Battery
charging
line
Charging coil
line
Ground line
If all components of the charging system are normal
and there are no loose connections at the regulator/
rectifier connectors, replace the regulator/rectifier
unit.
REMOVAL/INSTALLATION
Remove the left rear cowl (page 2-5).
Disconnect the regulator/rectifier 2P (Black) and
alternator 3P (Black) connector.
Remove the regulator/rectifier unit mounting bolts
and nuts.
Install the regulator/rectifier unit in the reverse
order of removal.
email: info@motomatrix.co.uk
Terminal Specification
Red (+) Battery voltage
and
should register
Green (-)
0.1 – 1.0 Ω
Yellow and
Yellow at (20°C/68°F)
Green and Continuity
ground should exist
BATTERY/CHARGING SYSTEM
REGULATOR/RECTIFIER
3P (Black)
REGULATOR/RECTIFIER
CONNECTOR
2P (Black)
CONNECTOR
NUTS/BOLTS
2P (Black)
CONNECTOR
17-9