Brake Pad/Disc - Honda CBF600SA Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Fill the front brake reservoir to the upper level line
(casting ledge) with DOT 4 brake fluid.
Install the diaphragm, set plate and reservoir cap,
then tighten the screws to the specified torque.
TORQUE: 1.5 N·m (0.20 kgf·m, 1.1 lbf·ft)
Fill the rear brake reservoir to the upper level line
with DOT 4 brake fluid.
Install the diaphragm, set plate and reservoir cap.
Install and tighten the bolt to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the right side cover (page 2-5).

BRAKE PAD/DISC

FRONT BRAKE PAD REPLACEMENT
(CBF600SA/NA)
Push the caliper pistons all the way in to allow
Check the brake
installation of new brake pads by pushing the cali-
fluid level in the
per body inward.
brake master
cylinder reservoir as
this operation
causes the level to
rise.
email: info@motomatrix.co.uk
HYDRAULIC BRAKE
UPPER LEVEL LINE
(CASTING LEDGE)
SET PLATE/DIAPHRAGM
SET PLATE/DIAPHRAGM
BOLT
RESERVOIR
"UPPER" LEVEL
RESERVOIR CAP
BRAKE CALIPER
15-15