Honda CBF600SA Service Manual page 434

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
REAR WHEEL/SUSPENSION
INSTALLATION
Apply thin coat of grease to the swingarm pivot bolt
surface.
Install the swingarm into the frame.
Install the swingarm pivot bolt from the left side.
Remove the swingarm pivot nut and washer.
Install and tighten the pivot bracket upper and lower
nuts to the specified torque.
TORQUE: 69 N·m (7.0 kgf·m, 51 lbf·ft)
Install and tighten the swingarm pivot nut to the
specified torque.
TORQUE: 98 N·m (10.0 kgf·m, 72 lbf·ft)
Move the swingarm up and down several times and
make sure it moves smoothly.
Install the shock absorber lower mounting bolt/nut,
then tighten the nut to the specified torque.
TORQUE: 42 N·m (4.3 kgf·m, 31 lbf·ft)
14-24
email: info@motomatrix.co.uk
PIVOT BRACKET
PIVOT NUT/WASHER
UPPER NUT
LOWER NUT
LOWER MOUNTING BOLT/NUT
SWINGARM
PIVOT BOLT
PIVOT NUT