Honda CBF600SA Service Manual page 496

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
ANTI–LOCK BRAKE SYSTEM (ABS; CBF600SA/NA)
3. Speed Sensor Line Short Circuit Inspection (at
control unit side)
Remove the following:
– seat (page 2-4)
– right side cover (page 2-5)
Disconnect the ABS modulator 25P connector
and the speed sensor 2P (Green) connector.
Check for continuity between the Pink/white wire
terminal of the connector and ground, and
between the Green/red wire terminal of the con-
nector and ground.
TOOL:
Test probe
CONNECTION: Pink/white – Ground
Is there continuity?
YES
NO
4. Speed Sensor Line Short Circuit Inspection (at
sensor side)
Check for continuity between each terminal
(Black and White) of the sensor side 2P (Red)
connector and ground in the same manner as
the previous step.
CONNECTION: Black – Ground
Is there continuity?
YES
NO
5. Speed Sensor Line Open Circuit Inspection
Short the Pink/white and Green/red wire termi-
nals of the 25P connector with a jumper wire.
Check for continuity between the terminals of
the wire harness side sensor 2P (Red) connector.
CONNECTION: Black – White
Is there continuity?
YES
NO
16-14
email: info@motomatrix.co.uk
07ZAJ-RDJA110
Green/red – Ground
– Short circuit in wire between the ABS
modulator and speed sensor.
– GO TO STEP 4.
White – Ground
– Faulty rear wheel speed sensor.
– GO TO STEP 5.
– GO TO STEP 6.
– Open circuit in wire between the ABS
modulator and speed sensor.
MODULATOR 25P CONNECTOR
(Wire side/female terminals)
Pink/white
Green/red
2P (Red) CONNECTOR
(Sensor side/male terminals)
White
Black
2P (Red) CONNECTOR
(Wire side/male terminals)
Black White
MODULATOR 25P CONNECTOR
(Wire side/male terminals)
Pink/white
Green/red