Honda CBF600SA Service Manual page 427

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Press a new needle bearing into the lower mount so
Press the needle
that the needle bearing surface is lower 5.0 – 5.5mm
bearing into the
(0.20 – 0.22 in) from the end of the lower mount
lower mount with
using the same tools.
the marked side
facing out.
TOOLS:
Driver
Attachment, 22 X 24 mm
Pilot, 17 mm
Apply grease to the new dust seal lips, install them
into the lower mount.
Install the pivot collar.
INSTALLATION
Install the shock absorber into the frame.
Install the upper and lower mounting bolt/nut.
Tighten the upper mounting nut to the specified
torque.
TORQUE: 42 N·m (4.3 kgf·m, 31 lbf·ft)
Install the 3-way hose to the hose clamp.
email: info@motomatrix.co.uk
DRIVER
07749-0010000
07746-0010800
07746-0040400
ATTACHMENT/
PILOT
PIVOT COLLAR
HOSE CLAMP
REAR WHEEL/SUSPENSION
5.0 – 5.5 mm
(0.20 – 0.22 in)
NEEDLE BEARING
DUST SEALS
UPPER MOUNTING BOLT/NUT
SHOCK ABSORBER
3-WAY HOSE
14-17